2013-08-03T10:51:03Z

Southrop: /* Additional requirements for the subtitle extraction script */ Updated ExRelease to r8, which is now a PowerShell module and adds typesetting detection for .ass subtitles

This article is aimed at providing useful information regarding adding screenshots to your description and the software used.

Adding screenshots to your description is necessary, as it's meant to preview the video and subtitle quality for the torrent. For that reason when taking screenshots they must be in source resolution, PNG (lossless) format, unless the video is anamorphic in which case they need to be in display resolution.

__TOC__
<tt style="color:gray; font-size:80%; float:right;">r6 - 2013-07-06</tt>
=Taking Screenshots=
# <span style="font-size:140%;"><span style="color:green;">Recommended:</span> AvsPmod</span> (& AviSynth, Dither)
#: Most flexible solution, but requires a few steps to set up.
#:* + using Firesledge's script provided in this thread pretty much guarantees the screenshots to be the most faithful representation of the source
#:* + high quality scaling for comparing releases with different frame dimensions
#:* + AvsPmod provides efficient and convenient ways to compare multiple releases and batch export screenshots
#:* - rendering subtitles requires them to be demuxed from the release
# <span style="font-size:140%;"><span style="color:green;">Good:</span> MPC-HC + madVr</span>
#: Easy to set up solution that doubles as THE high quality video playback solution on Windows, but not as convenient as method #1
#:* + video quality on par with the AviSynth method
#:* + easy to set up (install CCCP) and use (like a media player), doesn't require any demuxing or indexing
#:* - does not supporting scaled screenshots for comparing releases with different frame dimensions
#:* - not as well suited (or intended) as AvsPmod for more extensive comparisons, comparing releases side-by-side possible but cumbersome
# <span style="font-size:140%;"><span style="color:green;">Good:</span> mpv</span> (opengl-hq)
#: Cross-platform solution also available on Mac OS X and Linux, not as convenient as method #1
#:* + easy to set up and use if you're familar with the command line
#:* + access to advanced configuration options and quite powerful video filters for a video player
#:* - video quality very slightly inferior to methods #1 and #2
#:* - not as well suited (or intended) as AvsPmod for more extensive comparisons, comparing releases side-by-side possible but cumbersome
# <span style="font-size:140%;"><span style="color:orange;">Avoid:</span> MPC-HC + EVR CP</span>
#: Default setup when installing CCCP or MPC-HC/BE.
#:* ! not a fault of EVR in and by itself, but an all too common error source: uses video "enhancement" features of your video card driver which actually destroys the video (and your screenshots) in several ways, including but not limited to:
#:** fucking up colors,
#:** adding ugly sharpening,
#:** creating sugoi banding, and
#:** other artifacts.
#::If you absolutely have to use the EVR renderer for taking screenshots, '''make sure''' all video enhancement options of your graphics card driver are turned off
#:* - possible pixel shift to the left (tested on recent NVidia drivers)
#:* - slightly inferior video quality compared to madVr (defaults to bilinear chroma upscaling, random dithering using lav video decoder)
# <span style="font-size:140%;"><span style="color:red;">Do not EVER use:</span> VLC</span>
#: Atrocious video player with terrible video quality
#:* - uses wrong matrix for RGB conversion (results in wrong colors)
#:* - uses point upscaling for chroma planes
#:* - introduces strong banding
#:* - all the other bugs (including some that haven't been fixed in years) make it equally unsuitable media player. Seriously, stop using VLC!
# <span style="font-size:140%;"><span style="color:red;">Do not use <span style="font-size:60%;">until further notice</span>:</span> FFmpeg</span>
#: Versatile command line video/audio processing tool unsuitable for taking screenshots
#:* - incorrectly uses BT.601 matrix for all content (results in wrong colors)
#:* - colormatrix filter causes strong banding
#:* - uses point upscaling for chroma planes and ordered dithering (low video quality)
#:* - not practical doing screenshot comparisons (as a standalone tool), doesn't seem to be able to take frame numbers as seek points

==<span style="color:green;">AvsPmod</span>==
===Required Components===
====Basic requirements====
{| class="wikitable"
|-
! '''Software'''
! '''Version'''
!
|-
| AviSynth
| 2.6a4
| [http://sourceforge.net/projects/avisynth2/files/AviSynth_Alpha_Releases/AVS%202.6.0%20Alpha%204%20%5B130114%5D/AviSynth_130114.exe Download]
|-
| AvsPmod
| 2.5.1 (+upd. library)
| [http://files.line0.in/avisynth/AvsPmod_v2.5.1_libupdate.zip Download]
|-
| FFMS2
| r743 (10bithack)
| [http://nmm.me/vh Download]
|-
| Dither Avisynth Tools
| 1.22.1
| [http://ldesoras.free.fr/src/avs/dither-1.22.1.zip Download]
|-
| Masktools
| 2.0a48 for 2.6a4 (06_taro)
| [http://tmod.nmm-hd.org/Misc/mt_masktools-26-for-2.6alpha4.7z Download]
|-
| xy-vsfilter
| 3.0.0.214
| [http://puu.sh/32YXM.dll Download]
|-
| FFInfoEx
| r1
| [http://files.line0.in/avisynth/FFInfoEx.avsi Download]
|}

This tutorial also assumes you're running a '''fully updated Windows 7/8''' machine with all recent VC++ distributables, .net Frameworks and whatnot. Things probably also work on Vista/XP and you might even get them to run with Wine on Linux, but you're on your own.

====Additional requirements <span style="font-size:70%; font-weight:normal;">for the subtitle extraction script</span>====

{| class="wikitable"
|-
! '''Software'''
! '''Version'''
!
|-
| Windows Powershell
| 3.0
| [http://download.microsoft.com/download/E/7/6/E76850B8-DA6E-4FF5-8CCE-A24FC513FD16/Windows6.1-KB2506143-x86.msu Download (x86)] / [http://download.microsoft.com/download/E/7/6/E76850B8-DA6E-4FF5-8CCE-A24FC513FD16/Windows6.1-KB2506143-x64.msu Download (x64)]
<span style="font-size:80%;">Installed by default on Win 8, Win 7 SP1 users need to upgrade.<br />
No XP/Vista support.</span>
|-
| Microsoft .NET Framework
| 4.5
| [http://download.microsoft.com/download/B/A/4/BA4A7E71-2906-4B2D-A0E1-80CF16844F5F/dotNetFx45_Full_setup.exe Download] <span style="font-size:80%;">(Prerequisite for Powershell 3)</span>
|-
| MKVToolNix
| 6.3.0
| [http://www.downloadbestsoft.com/download/mkvtoolnix-unicode-6.3.0-1-setup.exe Download]
|-
| SIL FontUtils
| 1.00
| [http://scripts.sil.org/cms/scripts/render_download.php?format=file&media_id=TTFontUtils_1_00&filename=TTFontUtils_1_00.exe Download]
|-
| ExRelease
| r8
| [https://github.com/line0/ExRelease/releases/ Download]
|}

===Setting thing up the environment===
<ol><li>Install AviSynth</li>

<li>Open your AviSynth plugins directory in Explorer<br />
Unless you changed the the AviSynth install location, your plugins directory should be<br />
<span style="color:gray; font-size:80%; line-height:1em;">(enter these into your explorer location bar):</span>
<ul><li>[On 64-bit Windows] <tt><span style="color:blue">%ProgramFiles(x86)%\AviSynth 2.5\plugins</span></tt></li>
<li>[On 32-bit Windows] <tt><span style="color:blue">%ProgramFiles%\AviSynth 2.5\plugins</span></tt></li></ul>
There should be only 3 files inside the directory: <tt><span style="color:blue">colors_rgb.avsi</span></tt>, <tt><span style="color:blue">DirectShowSource.dll</span></tt>, <tt><span style="color:blue">TCPDeliver.dll</span></tt></li>

<li>Open the Dither Avisynth Tools archive (<tt><span style="color:blue">dither-1.22.1.zip</span></tt>) and unpack the following files to your AviSynth plugin directory:
<ul><li><tt><span style="color:blue">avstp.dll</span></tt></li>
<li><tt><span style="color:blue">dither.avsi</span></tt></li>
<li><tt><span style="color:blue">dither.dll</span></tt></li>
<li><tt><span style="color:blue">mt_xxpand_multi.avsi</span></tt></li></ul>
<span style="color:gray; font-size:80%; line-height:1em;">The docs folder inside the archive contains detailed documentation on the dither tools, so you might want to extract this to your AviSynth Docs directory or anywhere else you'll find it in case you need it later</span></li>

<li>Open the downloaded ffms2 archive and extract the contents into your Avisynth plugin directory
<ul><li><tt><span style="color:blue">ffms2.dll</span></tt></li>
<li><tt><span style="color:blue">ffmsindex.exe</span></tt></li></ul></li>

<li>Open the downloaded masktools archive and extract <tt><span style="color:blue">mt_masktools-26.dll</span></tt> to your AviSynth plugin directory</li>

<li>Open the downloaded AvsPmod archive and extract the <tt><span style="color:blue">AvsPmod</span></tt> folder to:
<ul><li>On 64-bit Windows: <tt><span style="color:blue">%ProgramFiles(x86)%</span></tt></li>
<li>On 32-bit Windows: <tt><span style="color:blue">%ProgramFiles%</span></tt></li></ul>
Create a shortcut to <tt><span style="color:blue">avspmod.exe</span></tt>, or pin it to the taskbar/start menu</li>

<li>Copy the downloaded <tt><span style="color:blue">VSFilter.dll</span></tt> and <span style="color:blue">FFInfoEx.avsi</span> to your Avisynth plugin directory</li></ol>

===Getting started with screenshot comparisons===
<ol><li>Start AvsPmod and open the settings dialog (''Options > Program settings'')
<ol style="list-style-type:lower-latin;">
<li>On the ''User Sliders'' tab check ''Hide slider window by default'' (The slider window usually only gets in the way)</li>
<li> If you are using more than one screen, it's usually wise to check the ''Seperate preview window'' option, so you can have one screen dedicated to the video and one to the script</li>
<li>On the Misc tab, uncheck the ''Show warning for bad plugin naming at startup'' option</li></ol></li>

<li>Go to ''Options > Snippets'' and click on ''Insert''. Insert the following script template as snippet and give it a tag you will remember<br />
<span style="color:gray; font-size:80%; line-height:1em;">(Script by Firesledge with a few additions)</span></li>

<tt>
vidfile="<span style="color:brown">VIDEOFILE</span>"
subfile=""

c1 = FFVideoSource (vidfile, enable10bithack=false)
c2 = FFVideoSource (vidfile, enable10bithack=true, varprefix="c1_")
w = c1.Width ()
h = c1.Height ()
wm4 = (w + 3) / 4 * 4
hm4 = (h + 3) / 4 * 4
b10 = (c2.Height () > c1.Height ())

<span style="color:brown">
target_width = w
target_height = h</span>
display_timecode = false
display_subtitles = true
group = "<span style="color:brown">GROUPNAME</span>"

matrix = (c1_FFCOLOR_SPACE == 1) ? "709"
\ : (c1_FFCOLOR_SPACE >= 5) ? "601" : Dither_undef ()
par = (c1_FFSAR_NUM > 0 && c1_FFSAR_DEN > 0)
\ ? Float (c1_FFSAR_NUM) / Float (c1_FFSAR_DEN)
\ : Dither_undef ()
tv_range = (c1_FFCOLOR_RANGE != 2)

(b10) ? c2 : c1

(StrLen(subfile) > 0 && display_subtitles) ?
\ (b10) ? Dither_limit_dif16(DitherPost(mode=-1).TextSub(subfile).Dither_convert_8_to_16 (), thr=1.0, elast=2.0) : TextSub(subfile)
\: nop()

(VersionNumber () >= 2.6) ? last
\ : (b10) ? Dither_addborders16 (0, 0, wm4 - w, hm4 - h)
\ : AddBorders (0, 0, wm4 - w, hm4 - h)

(target_width != c1.Width() || target_height != c1.Height()) ? Dither_srgb_display (lsb_in=b10, matrix=matrix, par=par, tv_range=tv_range, w=target_width, h=target_height)
\ : Dither_srgb_display (lsb_in=b10, matrix=matrix, par=par, tv_range=tv_range)

cmt = (target_width > c1.Width() || target_height > c1.Height()) ? group + "\nupscaled" : group
FFInfoEx(vfrtime=display_timecode, cfrtime=false, frametype=false, x=last.width-6, y=4, cmt=cmt, align=9, shorttime=true)
</tt>

<li>Now that you're all set, let's load the videos to compare.
<ol style="list-style-type:lower-latin;">
<li>Click into the empty script window and hit <span style="color:navy">F7</span> to get a list of your snippets. Since there's only the one snipped you just created, hit <span style="color:navy">TAB</span> to insert it</li>
<li>Replace <tt><span style="color:brown">VIDEOFILE</span></tt> in the first line with the full path to an episode of the first release you want to compare and <tt><span style="color:brown">GROUPNAME</span></tt> in the last line with the appropriate group tag</li>
<li>Hit <span style="color:navy">F5</span> to load (or refresh) the video. Loading a file for the first time might take a few seconds, since the file is being indexed first.</li>
<li>Save the script</li>
<li>Hit <span style="color:navy">Ctrl+N</span> or double click next to the current tab to open a new script tab</li>
<li>Repeat from Step '''3a'''</li></ol></li>

<li>Syncing up the releases (easymode)
<ol style="list-style-type:lower-latin;">
<li>Check if the video of all releases matches up, by going through them with Alt+1, Alt+2, Alt+3, ...<br />
The best way to do is is to seek to the last frame before a scene change, check if it matches up across tabs, then seek to the next frame and check again<br />
<span style="color:gray; font-size:80%; line-height:1em;">(Seek by using the arrow keys (<span style="color:navy">left/right</span>: 1 frame; <span style="color:navy">up/down</span>: 1 second) or clicking the timeline for larger time distances)</span><br /><br />
'''Note: ''' You may find out that not all subsequent frames match up or worse, the releases running out of sync over time. If it's only single frames, just avoid using them for screenshots.
In case of releases running out of sync, you're dealing with either missing sections or different frame rates. Refer to the <span style="color:gray">[Advanced Tutorial TBD]</span> on how to deal with those cases.</li>
<li>Once all releases you want to compare are in sync, right click their tabs and add them to a single group. Make sure the ''Apply offsets'' and ''Offset also bookmarks'' options are checked.<br />
<span style="color:gray; font-size:80%; line-height:1em;">AvsPmod will now remember the frame offsets between tabs and automatically seek to the right frames on a shared timeline.</span></li></ol></li>

<li><ol style="list-style-type:lower-latin;">
<li>To reasonably compare screenshots, we need all frame sizes to be of the same resolution. You should have noticed any differences already while syncing up the releases.<br />
If all resolutions match, skip this step. If they don't, find out the highest resolution by looking at the bottom right of the status bar.<br />
<span style="color:gray; font-size:80%; line-height:1em;">The information will be in the following format: FrameWidth x FrameHeight (AspectRatio) - Framerate fps - Colorspace</span></li>
<li>Take the largest width and height among the releases and find the following section in the scripts for all releases that need to be resized:
<pre style="color:brown">target_width = w
target_height = h</pre>
Replace <span style="color:brown">w</span> with the largest FrameWidth and <span style="color:brown">h</span> with the largest FrameHeight</li>
<li>Hit <span style="color:blue">F5</span> to refresh the video preview and confirm everything works as expected.</li>
</ol></li>

<li>Select frames for the screenshot comparison
<ol style="list-style-type:lower-latin;">
<li>Find a frame suitable to convey significant information about an aspect of video quality.<br />
Pick:
<ul><li>one or two frames of a structure that represents what is on the screen most of the episode (to give a general idea about the video quality)</li>
<li>frames from dark scenes</li>
<li>high-detail frames / frames with fine structures</li>
<li>frames with low contrast</li>
<li>frames from high-motion scenes</li>
<li>a frame or two from a fade-in/fade-out</li>
<li>frames that display video artifacts in one ore more releases <span style="font-size:80%; line-height:1em;"><span style="color:gray;">(refer to </span>[http://forums.bakabt.me/index.php?topic=32193 this]<span style="color:gray"> thread on how to spot and identify video artifacts)</span></span></li>
<li>at least one frame from the OP and one frame from the ED</li></ul>
<span style="color:gray; font-size:80%; line-height:1em;">Try to get as many B-Frames as possible. Ideally you'd want matching frame types across the different releases.<br />In practice checking this gets more of a waste of time with each additional release you have to compare. Just try to keep the number of B-to-I comparisons low and make sure you don't pick only B-Frames for one release and only P-Frames for the other.<br />A very easy way to avoid this issue is to not pick frames by only looking at one release. This comes with the added benefit of you being more likely to spot video artifacts in ALL releases.<br />(Check the overlay on the top right of the video frame to find the frame type of the current frame.)</span></li>
<li>Once you've decided on a frame, hit <span style="color:navy">Ctrl+B</span> to bookmark it.</li>
<li>Repeat from '''6a '''for each additional frame<br />
<span style="font-size:80%; line-height:1em;"><span style="color:gray">If you want to check the frames you already bookmarked, hit <span style="color:navy">F2</span>/<span style="color:navy">Shift+F2</span> to browse through your bookmarks</span></span></li></ol></li>

<li>Export screenshots
<ol style="list-style-type:lower-latin;">
<li>Once you're done deciding on frames to screenshot (10-15 is a good number), it's time to export them to PNG.<br />
Go to ''Macros > Save image sequence'' (make sure ''Select frames'' is set to "Bookmarks" and ''Output format'' to "*.png")</li>
<li>Pick an output directory and basename.<br />
I recommend using the basename format <tt>%06d_Groupname</tt>. This way your screenshots will (almost) always sort to comparison-friendly order by default. Make sure ''Add the frame number as suffix'' is checked when using <tt>%06d</tt>, otherwise it only counts up rather than inserting the current frame number.<br />
:::<span style="color:gray; font-size:80%; line-height:1em;">Example of Directory+Basename: Z:\ScreenCompare\Out\%06d_Zurako
You may also want want to check the ''Use always this directory'' option since you need to run this macro for each release seperately.</span></li>
<li>Click <span style="color:navy">OK</span>. You'll get a confirmation once the export is done.</li>
<li>Repeat from step '''7a''' for every open tab/release</li>
</ol>
</li></ol>

===Setting up the ExRelease extraction script===
<ol><li>Open Notepad or a text editor of your choice and type <tt>;</tt>.</li>

<li>Install MKVToolNix and copy the path to the destination folder into your notepad document.
<ol style="list-style-type:lower-latin;">
<li>Append a <tt>;</tt> to your notepad document. The contents should now look like this:</li>
;<span style="color:blue">C:\Program Files (x86)\MKVToolNix</span>;
</ol></li>

<li>Install FontUtils and make sure the ''Add installation directory to PATH'' option is checked</li>

<li>Remember your AviSynth plugin directory from the first tutorial? Copy its path to your notepad document and append another ";"<br />
Unless you changed the the AviSynth install location, your plugins directory should be<br />
<span style="color:gray; font-size:80%; line-height:1em;">(enter these into your explorer location bar to make them resolve to full paths)</span>:
<ul><li>[On 64-bit Windows] <tt><span style="color:blue">%ProgramFiles(x86)%\AviSynth 2.5\plugins</span></tt></li>
<li>[On 32-bit Windows] <tt><span style="color:blue">%ProgramFiles%\AviSynth 2.5\plugins</span></tt></li></ul>
Make sure you append the full path to your notepad document, so it looks like this:</li>
;<span style="color:blue">C:\Program Files (x86)\MKVToolNix</span>;<span style="color:blue">C:\Program Files (x86)\AviSynth 2.5\plugins</span>;

<li>Unpack the ExRelease archive to
<ul><li>[On 64-bit Windows] <tt><span style="color:blue">%ProgramFiles(x86)%\ExRelease</span></tt></li>
<li>[On 32-bit Windows] <tt><span style="color:blue">%ProgramFiles%\ExRelease</span></tt></li></ul>
<span style="color:gray; font-size:80%; line-height:1em;">(or another location of your choice)</span>
<ol style="list-style-type:lower-latin;">
<li>Append the path to your notepad document. It should now look like this:</li>
;<span style="color:blue">C:\Program Files (x86)\MKVToolNix</span>;<span style="color:blue">C:\Program Files (x86)\AviSynth 2.5\plugins</span>;<span style="color:blue">C:\Program Files (x86)\ExRelease</span>
</ol></li>

<li>To make the tools you just installed available to the script and the script conveniently available from everywhere, we need to add their locations to your '''PATH '''environment variable
<ol style="list-style-type:lower-latin;">
<li>Hit <span style="color:navy">Win+Pause</span> to open the System Control Panel</li>
<li>Click on ''Advanced System Settings'' <span style="color:gray; font-size:80%; line-height:1em;">(on the left sidebar)</span>, which should open the ''System Properties'' Window</li>
<li>Click on ''Environment Variables''</li>
<li>Browse the ''System variables'' until you find the '''Path''' variable. Highlight it and click on ''Edit...''</li>
<li>Click into the ''Variable value'' input field, and hit the <span style="color:navy">End</span> key to move the cursor behind the last entry (which should be your FontUtils path)</li>
<li>Append the contents of your notepad document and hit <span style="color:navy">Enter</span></li>
<li>Click ''OK ''on the ''Environment Variables'' and ''System Properties'' to save the settings</li>
</ol></li>

<li>Run Windows PowerShell (you'll find it in the programs menu)
<ol style="list-style-type:lower-latin;">
<li>Make sure you are running at least Powershell v3.0. Type
<pre style="color:brown">$PSVersionTable.PSVersion</pre>
into the command prompt and hit enter. If the number under ''Major ''says 3, you're good to go (continue with step '''8''')</li>
<li>If it doesn't, install
<ul><li>[On 64-bit Windows] <span style="color:blue">Windows6.1-KB2506143-x64.msu</span></li>
<li>[On 32-bit Windows] <span style="color:blue">Windows6.1-KB2506143-x86.msu</span></li></ul>
If the update fails with ''"The update is not applicable to your computer"'', you need to install the .NET Framework 4.5 (<span style="color:blue">dotNetFx45_Full_setup.exe</span>) first.<br />
<span style="color:gray; font-size:80%; line-height:1em;">You may need to restart your computer after installing Powershell 3.</span><br />
Open Windows PowerShell again and run
<pre style="color:brown">$PSVersionTable.PSVersion</pre>
to confirm you are now running version 3</li></ol></li>

<li>Next, we have to change the execution policy to allow running unsigned scripts. To do this, run
<pre style="color:brown">Set-ExecutionPolicy Bypass -Scope CurrentUser</pre>
and confirm with <span style="color:navy">Y</span>. With this preparations to run the ExRelease script are done.</li></ol>

===Using the ExRelease script to take screenshots with subtitles/typesetting===
The ExRelease script automates a number of thigs you'd otherwise have to do by hand:
<ul><li>Demuxes subtitles (currently only the first subtitle) from .mkv files</li>
<li>Extracts attached fonts softsubbed releases <span style="color:gray; font-size:80%; line-height:1em;">(which are required to render the subtitles correctly)</span></li>
<li>Loads extracted fonts into memory to make them available to the subtitle renderer</li>
<li>Finds the highest resolution of the releases you want to compare</li>
<li>Writes an AviSynth script with all important parameters already set, so you can start taking screenshots right away</li></ul>
<br />
<ol><li>Open PowerShell</li>
<li>Move or copy all releases you want to compare with each other to a separate folder. The script works on whole directories, so every .mkv file in the folder is going to be processed.</li>
<li>Run the script by typing
<pre style="color:brown;">ExRelease "X:\SomePath\To Love Ru Darkness"</pre>
<span style="color:gray; font-size:80%; line-height:1em;">(Substitute for your comparison directory, of course.)
You can use the <span style="color:navy;">Tab</span> key to auto-complete directories or just type "<span style="color:brown;">ExRelease</span>" and drag/drop the folder into PowerShell to insert its path.</span>
The script will now process your files and also create indexes, so it's time to go to the fridge and grab a beer.</li>

<li>When the script is done it will ask you if you want it to load fonts now. Answer with <span style="color:navy;">Y</span> for yes.
Fonts remain loaded in memory for the duration of the session <span style="color:gray; font-size:80%; line-height:1em;">(that means until you log out or shut down the computer)</span>.
<ol style="list-style-type:lower-latin;">
<li><span style="color:gray; font-size:80%; line-height:1em;">In case you want to (continue) work on the screenshot comparison after a logout or reboot, run the script again with</span>
<pre style="color:brown;">ExRelease "X:\SomePath\To Love Ru Darkness" -load</pre></li></ol></li>

<li>Open the generated .avs scripts <span style="color:gray; font-size:80%; line-height:1em;">(which reside next to the .mkv files)</span> in AvsPmod.<br />
<span style="color:gray; font-size:80%; line-height:1em;">If everything went right, all releases should display at the same resolution, subtitles should now be rendered on the frames, and the releases should now have the appropriate group tag next to the frame numbers.</span></li>

<li>To unload fonts after you are done with your comparison, run the script with
<pre style="color:brown;">ExRelease "X:\SomePath\To Love Ru Darkness" -unload</pre></li></ol>
<br />
<span style="color:gray;">'''Addendum:''' The script offers a number of advanced parameters that let you customize your workflow. Run</span>
<pre style="color:brown;">Get-Help ExRelease -detailed</pre>
<span style="color:gray;">in PowerShell to display its internal help file.</span>

==<span style="color:green;">MPC-HC + madVr</span>==
To come

==<span style="color:green;">mpv</span>==
To come

=Hosting Images=
You probably want to use [http://bakashots.me/ our image server]. If for some reason that doesn't suit you, take a look at these other options:

{{:Image hosts}}

=Adding Screenshots=
Adding these tags will not do anything to your description, instead it will add screenshots just below your description using a lightbox viewer for easy viewing. If using HTML code, screenshot tags may be placed inside or outside the <tt><html></tt> tags, there is no difference in parsing either way.

[screenshot]screenshot code goes here[/screenshot]
:Inserts screenshot thumbnails below the description. Thumbnails are resized to 150 pixels in width by default.

[screenshot=200]screenshot code goes here[/screenshot]
:Inserts screenshot thumbnails 200 pixels wide below the description. Change 200 to the pixel width of your screenshot thumbnails as necessary.

You can add more than one block of screenshots, possibly with different size thumbnails.

[img]link to image[/img]
:Will add one image. You can add as many as you like.

[url=link to image][img]link to thumbnail[/img][/url]
:Allows you to explicitly define your own thumbnail images. If no thumbnail image is supplied it will use the linked image and resize it to whatever width is supplied for the thumbnail.

'''NOTE: Screenshots will not show up in the Sandbox; you have to go to the torrent description page in order to view them.'''

If thumbnail images are not used, the big images are loaded first, then resized to thumbnail-size on your screen. This makes image-loading really slow, and also make scrolling laggy, so as far as possible supply thumbnail images or use an image-host that [[Screenshots#Hosting_Images|auto-generates]] them.

==BakaSHOTS Images==
For details on how to insert images hosted on BakaSHOTS into descriptions, please see here: [[BBCode#BakaSHOTS]].

DO NOT UPLOAD

2013-07-19T15:41:15Z

Southrop: /* Anime Licensed */

2013-07-08T16:38:12Z

Southrop: Updated to r6

This article is aimed at providing useful information regarding adding screenshots to your description and the software used.

Adding screenshots to your description is necessary, as it's meant to preview the video and subtitle quality for the torrent. For that reason when taking screenshots they must be in source resolution, PNG (lossless) format, unless the video is anamorphic in which case they need to be in display resolution.

__TOC__
<tt style="color:gray; font-size:80%; float:right;">r6 - 2013-07-06</tt>
=Taking Screenshots=
# <span style="font-size:140%;"><span style="color:green;">Recommended:</span> AvsPmod</span> (& AviSynth, Dither)
#: Most flexible solution, but requires a few steps to set up.
#:* + using Firesledge's script provided in this thread pretty much guarantees the screenshots to be the most faithful representation of the source
#:* + high quality scaling for comparing releases with different frame dimensions
#:* + AvsPmod provides efficient and convenient ways to compare multiple releases and batch export screenshots
#:* - rendering subtitles requires them to be demuxed from the release
# <span style="font-size:140%;"><span style="color:green;">Good:</span> MPC-HC + madVr</span>
#: Easy to set up solution that doubles as THE high quality video playback solution on Windows, but not as convenient as method #1
#:* + video quality on par with the AviSynth method
#:* + easy to set up (install CCCP) and use (like a media player), doesn't require any demuxing or indexing
#:* - does not supporting scaled screenshots for comparing releases with different frame dimensions
#:* - not as well suited (or intended) as AvsPmod for more extensive comparisons, comparing releases side-by-side possible but cumbersome
# <span style="font-size:140%;"><span style="color:green;">Good:</span> mpv</span> (opengl-hq)
#: Cross-platform solution also available on Mac OS X and Linux, not as convenient as method #1
#:* + easy to set up and use if you're familar with the command line
#:* + access to advanced configuration options and quite powerful video filters for a video player
#:* - video quality very slightly inferior to methods #1 and #2
#:* - not as well suited (or intended) as AvsPmod for more extensive comparisons, comparing releases side-by-side possible but cumbersome
# <span style="font-size:140%;"><span style="color:orange;">Avoid:</span> MPC-HC + EVR CP</span>
#: Default setup when installing CCCP or MPC-HC/BE.
#:* ! not a fault of EVR in and by itself, but an all too common error source: uses video "enhancement" features of your video card driver which actually destroys the video (and your screenshots) in several ways, including but not limited to:
#:** fucking up colors,
#:** adding ugly sharpening,
#:** creating sugoi banding, and
#:** other artifacts.
#::If you absolutely have to use the EVR renderer for taking screenshots, '''make sure''' all video enhancement options of your graphics card driver are turned off
#:* - possible pixel shift to the left (tested on recent NVidia drivers)
#:* - slightly inferior video quality compared to madVr (defaults to bilinear chroma upscaling, random dithering using lav video decoder)
# <span style="font-size:140%;"><span style="color:red;">Do not EVER use:</span> VLC</span>
#: Atrocious video player with terrible video quality
#:* - uses wrong matrix for RGB conversion (results in wrong colors)
#:* - uses point upscaling for chroma planes
#:* - introduces strong banding
#:* - all the other bugs (including some that haven't been fixed in years) make it equally unsuitable media player. Seriously, stop using VLC!
# <span style="font-size:140%;"><span style="color:red;">Do not use <span style="font-size:60%;">until further notice</span>:</span> FFmpeg</span>
#: Versatile command line video/audio processing tool unsuitable for taking screenshots
#:* - incorrectly uses BT.601 matrix for all content (results in wrong colors)
#:* - colormatrix filter causes strong banding
#:* - uses point upscaling for chroma planes and ordered dithering (low video quality)
#:* - not practical doing screenshot comparisons (as a standalone tool), doesn't seem to be able to take frame numbers as seek points

==<span style="color:green;">AvsPmod</span>==
===Required Components===
====Basic requirements====
{| class="wikitable"
|-
! '''Software'''
! '''Version'''
!
|-
| AviSynth
| 2.6a4
| [http://sourceforge.net/projects/avisynth2/files/AviSynth_Alpha_Releases/AVS%202.6.0%20Alpha%204%20%5B130114%5D/AviSynth_130114.exe Download]
|-
| AvsPmod
| 2.5.1
| [http://www.amvhell.com/avspmod/AvsPmod_v2.5.1.zip Download]
|-
| FFMS2
| r743 (10bithack)
| [http://nmm.me/vh Download]
|-
| Dither Avisynth Tools
| 1.22.1
| [http://ldesoras.free.fr/src/avs/dither-1.22.1.zip Download]
|-
| Masktools
| 2.0a48 for 2.6a4 (06_taro)
| [http://tmod.nmm-hd.org/Misc/mt_masktools-26-for-2.6alpha4.7z Download]
|-
| xy-vsfilter
| 3.0.0.214
| [http://puu.sh/32YXM.dll Download]
|-
| FFInfoEx
| r1
| [http://files.line0.in/avisynth/FFInfoEx.avsi Download]
|}

This tutorial also assumes you're running a '''fully updated Windows 7/8''' machine with all recent VC++ distributables, .net Frameworks and whatnot. Things probably also work on Vista/XP and you might even get them to run with Wine on Linux, but you're on your own.

====Additional requirements <span style="font-size:70%; font-weight:normal;">for the subtitle extraction script</span>====

{| class="wikitable"
|-
! '''Software'''
! '''Version'''
!
|-
| Windows Powershell
| 3.0
| [http://download.microsoft.com/download/E/7/6/E76850B8-DA6E-4FF5-8CCE-A24FC513FD16/Windows6.1-KB2506143-x86.msu Download (x86)] / [http://download.microsoft.com/download/E/7/6/E76850B8-DA6E-4FF5-8CCE-A24FC513FD16/Windows6.1-KB2506143-x64.msu Download (x64)]
<span style="font-size:80%;">Installed by default on Win 8, Win 7 SP1 users need to upgrade.<br />
No XP/Vista support.</span>
|-
| Microsoft .NET Framework
| 4.5
| [http://download.microsoft.com/download/B/A/4/BA4A7E71-2906-4B2D-A0E1-80CF16844F5F/dotNetFx45_Full_setup.exe Download] <span style="font-size:80%;">(Prerequisite for Powershell 3)</span>
|-
| MKVToolNix
| 6.3.0
| [http://www.downloadbestsoft.com/download/mkvtoolnix-unicode-6.3.0-1-setup.exe Download]
|-
| SIL FontUtils
| 1.00
| [http://scripts.sil.org/cms/scripts/render_download.php?format=file&media_id=TTFontUtils_1_00&filename=TTFontUtils_1_00.exe Download]
|-
| ExRelease
| r6
| [http://files.line0.in/avisynth/ExRelease_r6.zip Download]
|}

===Setting thing up the environment===
<ol><li>Install AviSynth</li>

<li>Open your AviSynth plugins directory in Explorer<br />
Unless you changed the the AviSynth install location, your plugins directory should be<br />
<span style="color:gray; font-size:80%; line-height:1em;">(enter these into your explorer location bar):</span>
<ul><li>[On 64-bit Windows] <tt><span style="color:blue">%ProgramFiles(x86)%\AviSynth 2.5\plugins</span></tt></li>
<li>[On 32-bit Windows] <tt><span style="color:blue">%ProgramFiles%\AviSynth 2.5\plugins</span></tt></li></ul>
There should be only 3 files inside the directory: <tt><span style="color:blue">colors_rgb.avsi</span></tt>, <tt><span style="color:blue">DirectShowSource.dll</span></tt>, <tt><span style="color:blue">TCPDeliver.dll</span></tt></li>

<li>Open the Dither Avisynth Tools archive (<tt><span style="color:blue">dither-1.22.1.zip</span></tt>) and unpack the following files to your AviSynth plugin directory:
<ul><li><tt><span style="color:blue">avstp.dll</span></tt></li>
<li><tt><span style="color:blue">dither.avsi</span></tt></li>
<li><tt><span style="color:blue">dither.dll</span></tt></li>
<li><tt><span style="color:blue">mt_xxpand_multi.avsi</span></tt></li></ul>
<span style="color:gray; font-size:80%; line-height:1em;">The docs folder inside the archive contains detailed documentation on the dither tools, so you might want to extract this to your AviSynth Docs directory or anywhere else you'll find it in case you need it later</span></li>

<li>Open the downloaded ffms2 archive and extract the contents into your Avisynth plugin directory
<ul><li><tt><span style="color:blue">ffms2.dll</span></tt></li>
<li><tt><span style="color:blue">ffmsindex.exe</span></tt></li></ul></li>

<li>Open the downloaded masktools archive and extract <tt><span style="color:blue">mt_masktools-26.dll</span></tt> to your AviSynth plugin directory</li>

<li>Open the downloaded AvsPmod archive and extract the <tt><span style="color:blue">AvsPmod</span></tt> folder to:
<ul><li>On 64-bit Windows: <tt><span style="color:blue">%ProgramFiles(x86)%</span></tt></li>
<li>On 32-bit Windows: <tt><span style="color:blue">%ProgramFiles%</span></tt></li></ul>
Create a shortcut to <tt><span style="color:blue">avspmod.exe</span></tt>, or pin it to the taskbar/start menu</li>

<li>Copy the downloaded <tt><span style="color:blue">VSFilter.dll</span></tt> and <span style="color:blue">FFInfoEx.avsi</span> to your Avisynth plugin directory</li></ol>

===Getting started with screenshot comparisons===
<ol><li>Start AvsPmod and open the settings dialog (''Options > Program settings'')
<ol style="list-style-type:lower-latin;">
<li>On the ''User Sliders'' tab check ''Hide slider window by default'' (The slider window usually only gets in the way)</li>
<li> If you are using more than one screen, it's usually wise to check the ''Seperate preview window'' option, so you can have one screen dedicated to the video and one to the script</li>
<li>On the Misc tab, uncheck the ''Show warning for bad plugin naming at startup'' option</li></ol></li>

<li>Go to ''Options > Snippets'' and click on ''Insert''. Insert the following script template as snippet and give it a tag you will remember<br />
<span style="color:gray; font-size:80%; line-height:1em;">(Script by Firesledge with a few additions)</span></li>

<tt>
vidfile="<span style="color:brown">VIDEOFILE</span>"
subfile=""

c1 = FFVideoSource (vidfile, enable10bithack=false)
c2 = FFVideoSource (vidfile, enable10bithack=true, varprefix="c1_")
w = c1.Width ()
h = c1.Height ()
wm4 = (w + 3) / 4 * 4
hm4 = (h + 3) / 4 * 4
b10 = (c2.Height () > c1.Height ())
<span style="color:brown">
target_width = w
target_height = h</span>
display_timecode = false

matrix = (c1_FFCOLOR_SPACE == 1) ? "709"
\ : (c1_FFCOLOR_SPACE >= 5) ? "601" : Dither_undef ()
par = (c1_FFSAR_NUM > 0 && c1_FFSAR_DEN > 0)
\ ? Float (c1_FFSAR_NUM) / Float (c1_FFSAR_DEN)
\ : Dither_undef ()
tv_range = (c1_FFCOLOR_RANGE != 2)

(b10) ? c2 : c1

(StrLen(subfile) > 0 && display_subtitles) ?
\ (b10) ? StackVertical(Dither_get_msb().TextSub(subfile), Dither_get_lsb()) : TextSub(subfile)
\: nop()

(VersionNumber () >= 2.6) ? last
\ : (b10) ? Dither_addborders16 (0, 0, wm4 - w, hm4 - h)
\ : AddBorders (0, 0, wm4 - w, hm4 - h)

(target_width != c1.Width() || target_height != c1.Height()) ? Dither_srgb_display (lsb_in=b10, matrix=matrix, par=par, tv_range=tv_range, w=target_width, h=target_height)
\ : Dither_srgb_display (lsb_in=b10, matrix=matrix, par=par, tv_range=tv_range)

FFInfoEx(vfrtime=display_timecode, cfrtime=false, frametype=false, x=last.width-6, y=4, cmt="<span style="color:brown">GROUPNAME</span>", align=9, shorttime=true)
</tt>

<li>Now that you're all set, let's load the videos to compare.
<ol style="list-style-type:lower-latin;">
<li>Click into the empty script window and hit <span style="color:navy">F7</span> to get a list of your snippets. Since there's only the one snipped you just created, hit <span style="color:navy">TAB</span> to insert it</li>
<li>Replace <tt><span style="color:brown">VIDEOFILE</span></tt> in the first line with the full path to an episode of the first release you want to compare and <tt><span style="color:brown">GROUPNAME</span></tt> in the last line with the appropriate group tag</li>
<li>Hit <span style="color:navy">F5</span> to load (or refresh) the video. Loading a file for the first time might take a few seconds, since the file is being indexed first.</li>
<li>Save the script</li>
<li>Hit <span style="color:navy">Ctrl+N</span> or double click next to the current tab to open a new script tab</li>
<li>Repeat from Step '''3a'''</li></ol></li>

<li>Syncing up the releases (easymode)
<ol style="list-style-type:lower-latin;">
<li>Check if the video of all releases matches up, by going through them with Alt+1, Alt+2, Alt+3, ...<br />
The best way to do is is to seek to the last frame before a scene change, check if it matches up across tabs, then seek to the next frame and check again<br />
<span style="color:gray; font-size:80%; line-height:1em;">(Seek by using the arrow keys (<span style="color:navy">left/right</span>: 1 frame; <span style="color:navy">up/down</span>: 1 second) or clicking the timeline for larger time distances)</span><br /><br />
'''Note: ''' You may find out that not all subsequent frames match up or worse, the releases running out of sync over time. If it's only single frames, just avoid using them for screenshots.
In case of releases running out of sync, you're dealing with either missing sections or different frame rates. Refer to the <span style="color:gray">[Advanced Tutorial TBD]</span> on how to deal with those cases.</li>
<li>Once all releases you want to compare are in sync, right click their tabs and add them to a single group. Make sure the ''Apply offsets'' option is checked<br />
<span style="color:gray; font-size:80%; line-height:1em;">AvsPmod will now remember the frame offsets between tabs and automatically seek to the right frames on a shared timeline.</span></li></ol></li>

<li><ol style="list-style-type:lower-latin;">
<li>To reasonably compare screenshots, we need all frame sizes to be of the same resolution. You should have noticed any differences already while syncing up the releases.<br />
If all resolutions match, skip this step. If they don't, find out the highest resolution by looking at the bottom right of the status bar.<br />
<span style="color:gray; font-size:80%; line-height:1em;">The information will be in the following format: FrameWidth x FrameHeight (AspectRatio) - Framerate fps - Colorspace</span></li>
<li>Take the largest width and height among the releases and find the following section in the scripts for all releases that need to be resized:
<pre style="color:brown">target_width = w
target_height = h</pre>
Replace <span style="color:brown">w</span> with the largest FrameWidth and <span style="color:brown">h</span> with the largest FrameHeight</li>
<li>Hit <span style="color:blue">F5</span> to refresh the video preview and confirm everything works as expected.</li>
</ol></li>

<li>Select frames for the screenshot comparison
<ol style="list-style-type:lower-latin;">
<li>Find a frame suitable to convey significant information about an aspect of video quality.<br />
Pick:
<ul><li>one or two frames of a structure that represents what is on the screen most of the episode (to give a general idea about the video quality)</li>
<li>frames from dark scenes</li>
<li>high-detail frames / frames with fine structures</li>
<li>frames with low contrast</li>
<li>frames from high-motion scenes</li>
<li>a frame or two from a fade-in/fade-out</li>
<li>frames that display video artifacts in one ore more releases <span style="font-size:80%; line-height:1em;"><span style="color:gray;">(refer to </span>[http://forums.bakabt.me/index.php?topic=32193 this]<span style="color:gray"> thread on how to spot and identify video artifacts)</span></span></li>
<li>at least one frame from the OP and one frame from the ED</li></ul>
<span style="color:gray; font-size:80%; line-height:1em;">Try to get as many B-Frames as possible. Ideally you'd want matching frame types across the different releases.<br />In practice checking this gets more of a waste of time with each additional release you have to compare. Just try to keep the number of B-to-I comparisons low and make sure you don't pick only B-Frames for one release and only P-Frames for the other.<br />A very easy way to avoid this issue is to not pick frames by only looking at one release. This comes with the added benefit of you being more likely to spot video artifacts in ALL releases.<br />(Check the overlay on the top right of the video frame to find the frame type of the current frame.)</span></li>
<li>Once you've decided on a frame, hit <span style="color:navy">Ctrl+B</span> to bookmark it.</li>
<li>Repeat from '''6a '''for each additional frame<br />
<span style="font-size:80%; line-height:1em;"><span style="color:gray">If you want to check the frames you already bookmarked, hit <span style="color:navy">F2</span>/<span style="color:navy">Shift+F2</span> to browse through your bookmarks</span></span></li></ol></li>

<li>Export screenshots
<ol style="list-style-type:lower-latin;">
<li>Once you're done deciding on frames to screenshot (10-15 is a good number), it's time to export them to PNG.<br />
Go to ''Macros > Save image sequence'' (make sure ''Select frames'' is set to "Bookmarks" and ''Output format'' to "*.png")</li>
<li>Pick an output directory and basename.<br />
I recommend using the basename format <tt>%06d_Groupname</tt>. This way your screenshots will (almost) always sort to comparison-friendly order by default. Make sure ''Add the frame number as suffix'' is checked when using <tt>%06d</tt>, otherwise it only counts up rather than inserting the current frame number.<br />
:::<span style="color:gray; font-size:80%; line-height:1em;">Example of Directory+Basename: Z:\ScreenCompare\Out\%06d_Zurako
You may also want want to check the ''Use always this directory'' option since you need to run this macro for each release seperately.</span></li>
<li>Click <span style="color:navy">OK</span>. You'll get a confirmation once the export is done.</li>
<li>Repeat from step '''7a''' for every open tab/release</li>
</ol>
</li></ol>

===Setting up the ExRelease extraction script===
<ol><li>Open Notepad or a text editor of your choice and type <tt>;</tt>.</li>

<li>Install MKVToolNix and copy the path to the destination folder into your notepad document.
<ol style="list-style-type:lower-latin;">
<li>Append a <tt>;</tt> to your notepad document. The contents should now look like this:</li>
;<span style="color:blue">C:\Program Files (x86)\MKVToolNix</span>;
</ol></li>

<li>Install FontUtils and make sure the ''Add installation directory to PATH'' option is checked</li>

<li>Remember your AviSynth plugin directory from the first tutorial? Copy its path to your notepad document and append another ";"<br />
Unless you changed the the AviSynth install location, your plugins directory should be<br />
<span style="color:gray; font-size:80%; line-height:1em;">(enter these into your explorer location bar to make them resolve to full paths)</span>:
<ul><li>[On 64-bit Windows] <tt><span style="color:blue">%ProgramFiles(x86)%\AviSynth 2.5\plugins</span></tt></li>
<li>[On 32-bit Windows] <tt><span style="color:blue">%ProgramFiles%\AviSynth 2.5\plugins</span></tt></li></ul>
Make sure you append the full path to your notepad document, so it looks like this:</li>
;<span style="color:blue">C:\Program Files (x86)\MKVToolNix</span>;<span style="color:blue">C:\Program Files (x86)\AviSynth 2.5\plugins</span>;

<li>Unpack the ExRelease archive to
<ul><li>[On 64-bit Windows] <tt><span style="color:blue">%ProgramFiles(x86)%\ExRelease</span></tt></li>
<li>[On 32-bit Windows] <tt><span style="color:blue">%ProgramFiles%\ExRelease</span></tt></li></ul>
<span style="color:gray; font-size:80%; line-height:1em;">(or another location of your choice)</span>
<ol style="list-style-type:lower-latin;">
<li>Append the path to your notepad document. It should now look like this:</li>
;<span style="color:blue">C:\Program Files (x86)\MKVToolNix</span>;<span style="color:blue">C:\Program Files (x86)\AviSynth 2.5\plugins</span>;<span style="color:blue">C:\Program Files (x86)\ExRelease</span>
</ol></li>

<li>To make the tools you just installed available to the script and the script conveniently available from everywhere, we need to add their locations to your '''PATH '''environment variable
<ol style="list-style-type:lower-latin;">
<li>Hit <span style="color:navy">Win+Pause</span> to open the System Control Panel</li>
<li>Click on ''Advanced System Settings'' <span style="color:gray; font-size:80%; line-height:1em;">(on the left sidebar)</span>, which should open the ''System Properties'' Window</li>
<li>Click on ''Environment Variables''</li>
<li>Browse the ''System variables'' until you find the '''Path''' variable. Highlight it and click on ''Edit...''</li>
<li>Click into the ''Variable value'' input field, and hit the <span style="color:navy">End</span> key to move the cursor behind the last entry (which should be your FontUtils path)</li>
<li>Append the contents of your notepad document and hit <span style="color:navy">Enter</span></li>
<li>Click ''OK ''on the ''Environment Variables'' and ''System Properties'' to save the settings</li>
</ol></li>

<li>Run Windows PowerShell (you'll find it in the programs menu)
<ol style="list-style-type:lower-latin;">
<li>Make sure you are running at least Powershell v3.0. Type
<pre style="color:brown">$PSVersionTable.PSVersion</pre>
into the command prompt and hit enter. If the number under ''Major ''says 3, you're good to go (continue with step '''8''')</li>
<li>If it doesn't, install
<ul><li>[On 64-bit Windows] <span style="color:blue">Windows6.1-KB2506143-x64.msu</span></li>
<li>[On 32-bit Windows] <span style="color:blue">Windows6.1-KB2506143-x86.msu</span></li></ul>
If the update fails with ''"The update is not applicable to your computer"'', you need to install the .NET Framework 4.5 (<span style="color:blue">dotNetFx45_Full_setup.exe</span>) first.<br />
<span style="color:gray; font-size:80%; line-height:1em;">You may need to restart your computer after installing Powershell 3.</span><br />
Open Windows PowerShell again and run
<pre style="color:brown">$PSVersionTable.PSVersion</pre>
to confirm you are now running version 3</li></ol></li>

<li>Next, we have to change the execution policy to allow running unsigned scripts. To do this, run
<pre style="color:brown">Set-ExecutionPolicy Bypass -Scope CurrentUser</pre>
and confirm with <span style="color:navy">Y</span>. With this preparations to run the ExRelease script are done.</li></ol>

===Using the ExRelease script to take screenshots with subtitles/typesetting===
The ExRelease script automates a number of thigs you'd otherwise have to do by hand:
<ul><li>Demuxes subtitles (currently only the first subtitle) from .mkv files</li>
<li>Extracts attached fonts softsubbed releases <span style="color:gray; font-size:80%; line-height:1em;">(which are required to render the subtitles correctly)</span></li>
<li>Loads extracted fonts into memory to make them available to the subtitle renderer</li>
<li>Finds the highest resolution of the releases you want to compare</li>
<li>Writes an AviSynth script with all important parameters already set, so you can start taking screenshots right away</li></ul>
<br />
<ol><li>Open PowerShell</li>
<li>Move or copy all releases you want to compare with each other to a separate folder. The script works on whole directories, so every .mkv file in the folder is going to be processed.</li>
<li>Run the script by typing
<pre style="color:brown;">ExRelease "X:\SomePath\To Love Ru Darkness"</pre>
<span style="color:gray; font-size:80%; line-height:1em;">(Substitute for your comparison directory, of course.)
You can use the <span style="color:navy;">Tab</span> key to auto-complete directories or just type "<span style="color:brown;">ExRelease</span>" and drag/drop the folder into PowerShell to insert its path.</span>
The script will now process your files and also create indexes, so it's time to go to the fridge and grab a beer.</li>

<li>When the script is done it will ask you if you want it to load fonts now. Answer with <span style="color:navy;">Y</span> for yes.
Fonts remain loaded in memory for the duration of the session <span style="color:gray; font-size:80%; line-height:1em;">(that means until you log out or shut down the computer)</span>.
<ol style="list-style-type:lower-latin;">
<li><span style="color:gray; font-size:80%; line-height:1em;">In case you want to (continue) work on the screenshot comparison after a logout or reboot, run the script again with</span>
<pre style="color:brown;">ExRelease "X:\SomePath\To Love Ru Darkness" -load</pre></li></ol></li>

<li>Open the generated .avs scripts <span style="color:gray; font-size:80%; line-height:1em;">(which reside next to the .mkv files)</span> in AvsPmod.<br />
<span style="color:gray; font-size:80%; line-height:1em;">If everything went right, all releases should display at the same resolution, subtitles should now be rendered on the frames, and the releases should now have the appropriate group tag next to the frame numbers.</span></li>

<li>To unload fonts after you are done with your comparison, run the script with
<pre style="color:brown;">ExRelease "X:\SomePath\To Love Ru Darkness" -unload</pre></li></ol>
<br />
<span style="color:gray;">'''Addendum:''' The script offers a number of advanced parameters that let you customize your workflow. Run</span>
<pre style="color:brown;">Get-Help ExRelease -detailed</pre>
<span style="color:gray;">in PowerShell to display its internal help file.</span>

==<span style="color:green;">MPC-HC + madVr</span>==
To come

==<span style="color:green;">mpv</span>==
To come

=Hosting Images=
You probably want to use [http://bakashots.me/ our image server]. If for some reason that doesn't suit you, take a look at these other options:

{{:Image hosts}}

=Adding Screenshots=
Adding these tags will not do anything to your description, instead it will add screenshots just below your description using a lightbox viewer for easy viewing. If using HTML code, screenshot tags may be placed inside or outside the <tt><html></tt> tags, there is no difference in parsing either way.

[screenshot]screenshot code goes here[/screenshot]
:Inserts screenshot thumbnails below the description. Thumbnails are resized to 150 pixels in width by default.

[screenshot=200]screenshot code goes here[/screenshot]
:Inserts screenshot thumbnails 200 pixels wide below the description. Change 200 to the pixel width of your screenshot thumbnails as necessary.

You can add more than one block of screenshots, possibly with different size thumbnails.

[img]link to image[/img]
:Will add one image. You can add as many as you like.

[url=link to image][img]link to thumbnail[/img][/url]
:Allows you to explicitly define your own thumbnail images. If no thumbnail image is supplied it will use the linked image and resize it to whatever width is supplied for the thumbnail.

'''NOTE: Screenshots will not show up in the Sandbox; you have to go to the torrent description page in order to view them.'''

If thumbnail images are not used, the big images are loaded first, then resized to thumbnail-size on your screen. This makes image-loading really slow, and also make scrolling laggy, so as far as possible supply thumbnail images or use an image-host that [[Screenshots#Hosting_Images|auto-generates]] them.

==BakaSHOTS Images==
For details on how to insert images hosted on BakaSHOTS into descriptions, please see here: [[BBCode#BakaSHOTS]].